Tru-Remote - Welding Machine Remote: Product Information
The Tru-Remote digital display wireless welding machine remote is compatible with Lincoln, Miller, Multi Quip and Red-D-Arc welding machines. Featuring start, stop, increase and decrease amperage buttons the Tru-Remote is 100% consistent with analog temperature control and solid state designed boards. The Tru-Remote is the perfect tool for any welder!
The Tru-Remote Transmitter has digital display for Amperage, Battery life and Start and Run display. Six easy buttons include Stop, Start and Amperage Up and Down, Glow Plug (TR6) and Output Contact Off/On or High/Low IDLE compatibility.
Tru-Remote has been FCC and ICC certified, and is patent pending.
Compatibility
Remote Model | Lincoln Machines | Miller Machines |
---|---|---|
$1,450 | $1,450 | |
TR-8A | Invertec V350 | XMT 304 |
R3R-400 | XMT 350 | |
R3R-500 | Demension | |
$1,450 | $1,450 | |
TR-8 | Vantage 300, 400, 500 Vantage 322, 410, 435, 549,566 Ranger 305G & D Ranger 250, GXT 330 MPX Cross Country 300 SAE300 MP Classic 300 MP |
Trailblazer 302 & 325 EFI G & D Pro 350 Pro 300 Series Pipe Pro 304 Big Blue 400 Pro, Big Blue 400 Pipe Pro Big Blue 500, Big Blue 600 600 AIR PAK |
Remote Model | Lincoln Machines | Miller Machines |
---|---|---|
$1,650 | $1,650 | |
TR-8M | SA200 SA250 SA300 SA400 Pipe Liner 200, 250 G & D Classic 300D, 300HE Classic I, II, III SAE 300, 300HE, 500 |
Big Blue 30 & 40 |
Features
Digital Display
- Backup Light
- Greeting & Off Messages
- Start & Run Indicators
- Amp Increase/Decrease Numeric Display
- Battery Indicator
Start Button
- Energize Receiver
- Power Electric Choke / Power Glow Plugs
- Start Welding Machine
Stop Button
- Power Transmitter & Receiver Off
- Power Welding Machine Off
Increase & Decrease Amperage
- Analog Control Amperage with Memory
- Accurate Increments on Each Setting
- NEW 4 available outputs – Each output can be programmed for UP 1, UP 2, UP 3 or UP 5 Amp increments to suit your welding procedures
Glow Plug / Choke
- Preprogram 5 to 30 seconds
AUX/CO
- Output Contactor Enable/Disable
- High or Low IDLE
- Air Compressor ON/ OFF
Specifications
Transmitter
- Power Source: AA battery (x2)
- Dimensions: 4 3/4″ x 2 3/16″ x 1″ (120mm x 55mm x 25mm)
Receiver
- Input Power Source: 12VDC or 115AC
- Dimensions: 6 9/16″ x 6 1/16″ x 2 5/8″” (167mm x 154mm x 67mm)
Industrial control interface DC voltage 0-5V or 0-10V, water resistant Transmitter & Receiver, glass fiber heavy duty casing, programmable with Windows based software.
Accessories & Add Ons

26 Pin Amphenol Male/Female Disconnect
(Available for all models) Female Connector mounts on the machine panel and cable pigtail hardwires to machine. Male connector is cord mounted on the Tru-Remote receiver cable. Ideal for theft prevention.
Price: $200.00

Arc Force Control Board Module
Only available for TR8 Models on Vantage 300, 400, 500, Cross Country 300, Classic 300MP, Pipe Liner 200D
Price: $250.00

Miller 14 Pin Amphenol cable 22”
Required for all Miller 2018 & Newer 325, 325EFI, Miller Big Blue 400 Pro, Big Blue 400 Pipe Pro for Output interface
Price: $120.00

Miller Compressor Kit
(For Miller 302 and Big Blue Air Pak) Enables control of Compressor ON/OFF using Tru-Remote handheld transmitter.
Price: $50.00

Miller IGN Kit
Includes Male and Female Connectors on a Tru-Remote Adaptor Harness to simplify installation of a Tru-Remote on a Miller Machine.
Price: $40.00

Mode Harness
Allows operator to switch between 3 MODES with TR8 without leaving work station – Available for LINCOLN 305G, D – Vantage 300, 400, 500
Price: $90.00

Range Selector Module
For use with all Lincoln Classic Series, SA200 and PIPELINERS- THIS MODULE CONNECTS TO EXISTING TR6M or NEW TR8M TRU REMOTE (Programming, connectors, wires and instructions included).
Price: $1,050.00

Rubber Mounts (Bushings)
CALL FOR PRICING (604-868-4640)

Transmitter Case with Belt Clip
Black case with rotating belt clip
Price: $19.00

Tru-Remote Copier
Portable device for re-programming of the Tru-Remote for specific welding procedures while in the field. Can be programmed for up to 6 different output parameters (DH,CC STICK, TIG, CV, GOUGE).
Price: $90.00

Under Hood Kits
Available for Lincoln and Miller machines. Includes Aluminum bracket, Coaxial cable, isolated antenna support, antenna connectors.
Price: $58.00

Update Kits for Existing Remotes
Call for pricing (604-868-4640)